{"id":7993,"date":"2013-07-25T11:10:50","date_gmt":"2013-07-25T15:10:50","guid":{"rendered":"http:\/\/www.trinketsinbloom.com\/?p=7993"},"modified":"2013-10-13T13:14:52","modified_gmt":"2013-10-13T17:14:52","slug":"diy-studded-converse","status":"publish","type":"post","link":"https:\/\/www.trinketsinbloom.com\/diy-studded-converse\/","title":{"rendered":"DIY STUDDED CONVERSE"},"content":{"rendered":"
<\/a><\/p>\n <\/p>\n step 1<\/strong> I laid out a few ideas and took pictures with my phone before deciding.<\/p>\n step 2<\/strong> To do this I used a tape measure and a pencil to mark where I wanted the spikes to be.<\/p>\n When you know where you want your spikes, use your awl or sharp scissors to poke a hole through your shoes where you will be putting your spikes. Be careful!!!<\/p>\n This can be a little tricky down around the heel of the sneaker because of the reinforcement, but you can do it!<\/p>\n step 3<\/strong> I recommend making all your holes and putting all your screws in first before adding the spikes.<\/p>\n step 4<\/strong> Using a toothpick, put a small amount of glue on the screw part and screw your spike onto the screw.<\/p>\n This is where a screwdriver comes in handy. Make sure your screws are in tight.<\/p>\n Glue and screw in all spikes.<\/p>\n step 5<\/strong> If youve already taken a picture with your phone that will come in very handy here.<\/p>\n I didnt mark on the sneakers where to put the studs, I just eyeballed it. You can use a tape measure and a pencil and mark them if you want.<\/p>\n TIP:<\/strong> Ive found that the best way to add glue to your studs is to put some glue on a paper plate and use a toothpick to apply it to your stud before putting it on your sneaker.<\/p>\n Put glue on your studs and add them one by one to your sneakers.<\/p>\n Be careful to not use too much glue so that it squishes out and gets messy.<\/p>\n Add all your studs this way.<\/p>\n I put my flat top pyramid studs on the outside of my sneakers and a circle of round nailheads around the converse logo on the inside. The shape and size of the studs you use is up to you, have fun and make them your own!<\/p>\n Converse have been DIYd and embellished almost as long as theyve existed.<\/strong> Theres something so enticing about the simple style and clean lines that just begs for some form of embellishment. In school we all drew on our sneakers and the few punk rock kids did add a few spikes, but now with the much easier accessibility to studs and spikes we can all go crazy and cover our sneakers, plus its much more fashionable now. And for much less than theyre selling for at Barneys too!<\/p>\n Take a basic pair of sneakers, add a few studs and spikes and youve got an on trend pair of cool DIY Studded Converse to call your own! ADD SOME SPIKES ><\/p>\n","protected":false},"author":1,"featured_media":8772,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[970],"tags":[914,1900,438,291,904,723,913,915,916,724],"yoast_head":"\nADD SOME SPIKES ><\/a><\/h5>\n
\nIve wanted a pair of Studded Converse high tops for a long time now.<\/strong> I actually cut out this photo as inspiration last year, (I think around September). So finally, as a DIY birthday present to myself I made a pair! This fall youll see studded and spiked boots and shoes everywhere, so why not start a little early with a pair you can wear right now.<\/p>\nTOOLS & MATERIALS:<\/h2>\n
\n
\nFirst things first, decide how and where you want your studs and spikes to be.<\/p>\n
\nI started with the spikes down the back spine of the sneakers first.<\/p>\n
\nAs soon as you poke your hole through your sneaker put the screw through the hole. This will keep the fabric from closing in over the hole.<\/p>\n
\nWhen you have all your screws through your sneaker youre ready to add your spikes.<\/p>\n
\nNow youre ready to add your studs to the sides of your sneakers.<\/p>\nPlease leave me a comment and let me know how you embellished your sneakers!<\/h5>\n","protected":false},"excerpt":{"rendered":"