{"id":7701,"date":"2013-07-15T01:01:28","date_gmt":"2013-07-15T05:01:28","guid":{"rendered":"http:\/\/www.trinketsinbloom.com\/?p=7701"},"modified":"2013-10-13T12:50:50","modified_gmt":"2013-10-13T16:50:50","slug":"diy-lace-tank-with-ribbon-stripes","status":"publish","type":"post","link":"https:\/\/www.trinketsinbloom.com\/diy-lace-tank-with-ribbon-stripes\/","title":{"rendered":"DIY LACE TANK W RIBBON STRIPES"},"content":{"rendered":"
<\/a><\/p>\n Lay your fabric out folded in half and cut two pieces, the same size for your front and back.<\/p>\n I used the scalloped edge already on this fabric for the bottom hem.<\/p>\n step 2<\/strong> I made a straight\/diagonal line from the neck to the bottom hem.<\/p>\n Cut your sides.<\/p>\n step 3<\/strong> Dont go up too high.<\/p>\n Sew your side seams.<\/p>\n Roll a small hem along the edge of your arm holes, pin and sew.<\/p>\n step 4<\/strong> I folded a \u00c2\u00bc inch and then 1 \u00c2\u00bc\u00e2\u20ac\u009d hem on the top. You need to make sure your ribbon will fit through it easily.<\/p>\n Sew straight across the top where you pinned your fabric, do this on both your front and back pieces.<\/p>\n step 5<\/strong> Leave the ends of your ribbon long enough to tie in a bow.<\/p>\n step 6<\/strong> Note:<\/strong> If you don’t want this top to be shear you can line it with another fabric.<\/p>\n I cut a piece of lace the width of my top and about 8 inches high.<\/p>\n Using a needle and thread I used long basting stitches to sew this extra piece on.<\/p>\n step 7<\/strong> I cut a straight line up the center back of my top and a little bit across the top.<\/p>\n Then I cut a piece of my lace about a half inch taller than my cut and about 10 inches wide,<\/p>\n I pinned each side of this extra piece of fabric to each side of the cut I made in the center back and sewed it.<\/p>\n Then folding it in, making a box pleat, I pinned and sewed across the top of my pleat to hold it flat.<\/p>\n step 8<\/strong> I made 5 stripes across the front of my top about one inch apart.<\/p>\n Cut and pin your ribbons to your shirt. Make sure you leave at least a half inch extra on both sides of your ribbon for folding over or sew into the side seam.<\/p>\n step 9<\/strong> If Id been planning this right I would have sewn the ribbon to the front before I sewed the side seams, however it wouldve been a little difficult to get the placement right at that point.<\/p>\n Do what works best for you.<\/p>\n Make sure you also sew your ribbon across the front of your top as well as the sides.<\/p>\n This is my third project in a series of using fabric from Ikea<\/strong> (read home furnishing fabric and no Im not being compensated by Ikea, although that would be awesome!), you can see the other projects here<\/a> and here<\/a>. I really think that you can find so many uses for things that maybe a bit unexpected, like these home furnishing fabrics or hex nuts for example seen here<\/a> and here<\/a>.<\/p>\n So maybe Im channeling a little Scarlett OHara<\/strong> by using curtain fabric for a top, but that never stopped her, why should it stop us! The most important thing to look for when buying supplies is, do they inspire you and do they excite you? And I have to admit that Ikea has some great prints and fabrics right now a reasonable prices. Yes, I was inspired!<\/p>\n Go shear and create a DIY Lace Tank with Ribbon Stripes using unexpected fabric and grosgrain ribbon. TEAR DOWN THE CURTAINS ><\/p>\n","protected":false},"author":1,"featured_media":8851,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[6],"tags":[1900,438,291,884,888,886,885,887,849,724],"yoast_head":"\nTEAR DOWN THE CURTAINS ><\/a><\/h5>\n
\n<\/p>\nTOOLS & MATERIALS:<\/h2>\n
\n
\nstep 1<\/strong>
\nMeasure how wide and how tall you want your shirt to be, its best to do this by measuring around your widest point, be sure to add at least an inch and a half at the top for folding over and an inch or so on the sides for sewing.<\/p>\n
\nTo keep this shirt from being too thick around the neck, I tapered the sides. Just be careful not to cut in too much, otherwise it will get too tight across your chest.<\/p>\n
\nPin your sides together up to the arm holes. You can measure where you want your arm holes to be by holding the fabric up to your body.<\/p>\n
\nOn the inside, fold over your neck (the top of your fabric) and pin.<\/p>\n
\nAttach a safety pin to one end of your ribbon and feed it through one side of your top, then loop it around and feed it through the other.<\/p>\n
\nAfter getting to this point I decided to add a little extra fabric to the front (it was just too shear).<\/p>\n
\nI wanted to add a little extra fabric to the back, to give the top a little more swing.<\/p>\n
\nLay your top out on a flat surface and measure your ribbons.<\/p>\n
\nFold the ends of your ribbon over and sew your ribbon to your top, just on the front.<\/p>\nHave fun with this and let me know how yours turns out!<\/h5>\n","protected":false},"excerpt":{"rendered":"