{"id":6074,"date":"2013-03-18T00:01:40","date_gmt":"2013-03-18T04:01:40","guid":{"rendered":"http:\/\/www.trinketsinbloom.com\/?p=6074"},"modified":"2013-11-12T11:35:56","modified_gmt":"2013-11-12T16:35:56","slug":"diy-studded-turban","status":"publish","type":"post","link":"https:\/\/www.trinketsinbloom.com\/diy-studded-turban\/","title":{"rendered":"DIY STUDDED TURBAN"},"content":{"rendered":"
<\/a><\/p>\n <\/p>\n Bring out your inner diva, <\/p>\n I was inspired to make this DIY Studded Turban by the April 2013 issue of Lucky magazine.<\/strong> <\/p>\n step 1<\/strong><\/p>\n Lay your scarf out on a flat surface and measure out two long strips.<\/p>\n I made each of my strips 4.5 inches wide by the length of my scarf which is 28.5 inches.<\/p>\n <\/p>\n step 2<\/strong><\/p>\n Fold one strip in half with the right (pretty)<\/em> sides facing each other<\/p>\n From the fold measure 2 inches and put a pin on both sides.<\/p>\n Open your strip and put a line of glue all the way down each side.<\/p>\n You may want to put pins next to your glue to keep it in place.<\/p>\n Let your glue dry for at least an hour.<\/em><\/p>\n <\/p>\n step 3<\/strong><\/p>\n When your glue is dry enough to hold, turn your scarf right side out.<\/p>\n Do this very gently<\/em> you dont want to pull it and possibly pull the glue apart if it isnt completely dry.<\/p>\n <\/p>\n step 4<\/strong><\/p>\n Take your other scarf strip and put it through the hole (loop)<\/em> in the top of the first scarf strip.<\/p>\n step 5<\/strong><\/p>\n Smooth out this second scarf strip and glue one side. I recommend putting pins in this one to help it hold while it dries, since this one isnt laying flat.<\/p>\n Let it dry for at least an hour.<\/em><\/p>\n step 6<\/strong><\/p>\n When your first side is dry, take out your pins and glue the other side.<\/p>\n Pin if necessary and let dry for an hour.<\/em><\/p>\n <\/p>\n step 7<\/strong><\/p>\n When the glue is dry youre ready to add your studs.<\/p>\n Smooth out your first side of your turban and layout your studs. You may want to iron it to smooth out your seams.<\/p>\n When you have all your studs where you want them, put a small drop of your Jewel-it glue where you want each stud.<\/p>\n TIP:<\/strong> Do not put a lot of glue on your scarf.<\/em> The shiny twill fabric will really show any extra glue and it wont look nice.<\/p>\n You may want to let your glue sit for a few minutes before pressing your studs into the glue.<\/p>\n Repeat on the other side.<\/p>\n Note:<\/strong> If you check out the link to the studs I used they are iron on studs. I did not iron mine on, because my scarf is polyester and using a really hot iron on poly is a bad idea (it will melt). So if your scarf is silk or cotton, go for it, iron them on. If it’s polyester I recommend gluing them.<\/p>\n <\/p>\n step 8<\/strong><\/p>\n This is where you will add your rubber band.<\/strong><\/p>\n Measure your turban around your head,<\/em> keep in mind that you dont want it too tight or too loose.<\/p>\n Put a pin to mark where you will fold your ends over.<\/p>\n step 9<\/strong><\/p>\n Fold a small hem on each of your ends and glue.<\/p>\n Then fold your ends around your rubber band and glue.<\/p>\n <\/p>\n TIP:<\/strong> Use straight pins or if you have them clothespins to hold your hem around your rubber band to dry.<\/p>\n <\/p>\n Let dry.<\/em><\/p>\n <\/p>\n This tutorial was supposed to be posted on Friday but unfortunately life got in the way. So Scarf Week spilled over into this week.<\/p>\n I love accessories that can transform you to a different time or feeling.<\/em> They make you feel put together without much effort. This DIY Studded Turban takes the look of a vintage head wrap and makes it edgy with gold studs.<\/p>\n I was really surprised and happy with the way this project turned out. With the exception of waiting for the glue to dry it is also very quick to make.<\/p>\n The original inspiration turban is solid, but it turns out very cute on a printed scarf as well. This gives you lots of options<\/p>\n This “no sew”\u009d DIY Studded Turban is fun to make and even more fun to wear! GO DIVA ><\/p>\n","protected":false},"author":1,"featured_media":8918,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[971],"tags":[1900,291,703,699,700,247,497,702,701],"yoast_head":"\nGO DIVA ><\/a><\/h5>\n
\nwith a DIY Studded Turban!<\/p><\/blockquote>\nSupplies to make your DIY Studded Turban:<\/h2>\n
\n
\nIn their “beauty spy: hair report” they show the inspiration turban for this project. The original is by Jennifer Behr for Opening Ceremony and it retails for $495. You can make your own for less than $10,<\/strong> (depending on your scarf).<\/em><\/p>\nId love to hear what you think of this project or how yours turns out.
\nPlease leave me a comment.<\/h5><\/p>\n","protected":false},"excerpt":{"rendered":"