{"id":4972,"date":"2013-01-07T00:01:20","date_gmt":"2013-01-07T05:01:20","guid":{"rendered":"http:\/\/www.trinketsinbloom.com\/?p=4972"},"modified":"2013-10-13T16:09:24","modified_gmt":"2013-10-13T20:09:24","slug":"diy-penny-ring","status":"publish","type":"post","link":"https:\/\/www.trinketsinbloom.com\/diy-penny-ring\/","title":{"rendered":"DIY PENNY RING"},"content":{"rendered":"
<\/a><\/p>\n <\/p>\n step 2<\/strong> Take your penny and add a small amount of super glue to one spot on its side and set it on your rhinestone trim.<\/p>\n Wait about one minute for the glue to hold.<\/p>\n Once your glue is holding, keep adding glue to the side of your penny and attaching your rhinestone trim.<\/p>\n You can do this on a flat surface to make sure your trim and your penny are flush with each other.<\/p>\n TIP: Just keep carefully moving your penny and trim to make they dont stick to your surface.<\/p>\n Keep gluing until your rhinestone trim is glued all the way around your penny.<\/p>\n step 3<\/strong> Wrap your wire around it 4 times and leave about a one inch tail and cut your wire.<\/p>\n Pull your wire off your handle and wrap this tail end around your wrapped wires to hold them together.<\/p>\n Make sure your loose ends are on the outside of your ring.<\/p>\n step 4<\/strong> Take your wire ring and place the wrapped side into the glue.<\/p>\n You will need to hold it in place for a minute or two until the glue holds and then let it dry for about an hour, to make sure it really holds.<\/p>\n This is about as simple as a cocktail ring gets. But with a shiny penny and lots of rhinestones its definitely not short on sparkle.<\/p>\n I used a 2012 penny but you could make your DIY Penny Ring using any date thats important to you.<\/p>\n Have fun with it!<\/em><\/strong><\/p>\n Make yourself a Lucky Penny Ring DIY to remember 2012 or another important date, with this simple and fun DIY. GET LUCKY ><\/p>\n","protected":false},"author":1,"featured_media":9021,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[7],"tags":[1900,291,322,591,81],"yoast_head":"\nGET LUCKY ><\/a><\/h5>\n
Supplies to make your DIY Penny Ring:<\/h2>\n
\n
\nstep 1<\/strong>
\nMeasure your rhinestone trim around your penny to the exact measurement and cut.<\/p>\n
\nLay your rhinestone trim on a flat surface on its side.<\/p>\n
\nTake your wire and whatever youre using to wrap it around, I used the handle from my garlic press. Use whatever is closest to your finger size.<\/p>\n
\nTake your penny and place it face down on a smooth surface and put super glue in the middle on the back side.<\/p>\nLeave me a comment and let me know what you think.<\/h5>\n","protected":false},"excerpt":{"rendered":"