SPOON ROSE PIN DIY
One of the things I love the most about jewelry is it’s sculptural properties. Like wearing a piece of art. It can be a real conversation starter and a great way to express your personal style.
You really feel like McGuyver melting spoons over a candle.
It has been brought to my attention that melting plastic spoons releases a toxic gas that is very dangerous to breathe. When I did this project I knew that it was something to be careful of and I melted the spoons in an area by an open window with a lot of ventilation.
It is your choice whether or not you choose to make this project, but please be aware of the dangers of melting plastic. If you do choose to make it I would suggest if it’s possible to do it outside and make sure that the plastic does not catch on fire.
There are many types of plastics and a lot of information on the web about melting plastic.
What you’ll need to make your Spoon Rose Pin:
- 1 Box plastic spoons 24pcs
- Pin back or safety pin
Using your pliers carefully break off the handles of the spoons.
2 spoons – very close to the bowl of the spoon.
5 spoons – leave a little of the handle.
10+ spoons – leave about a half inch.
I used the whole box (minus 1 – I burned a hole through it).
Starting with the 2 smallest, hold the first spoon with your pliers over the candle. Be careful not to hold it to close, the plastic can catch on fire, which can be dangerous (obv!) and also leaves scorch marks of the spoons. I also recommend doing this by an open window or in a well ventilated area. Who knows what fumes may come from melting plastic spoons.
After you have melted the first 2 spoons you will need to melt the bases together. Don’t be afraid to use your pliers to pinch the hot plastic together.
Continue melting the spoons. After you’ve melted the 5 spoons with the slightly longer handles you can start melting handles and attaching them to create your flower.
Keep melting spoons and adding them to your flower until you feel it’s done.
Add your pin back by melting the plastic at the base of the flower and inserting your pin or by using a strong glue. I used hot glue which seems to be holding quite well.